Kosmetik qadoqlash materiallari va in'ektsion kalıplama texnologiyasi

May 04, 2020

Xabar QOLDIRISH

1、 Plastic materials

1, AS: hardness is not high, more brittle (when knocking with a crisp voice), transparent color, and the background bluing can directly contact with cosmetics, food, in ordinary emulsion bottles, vacuum bottles are generally bottle body material, also can make small capacity of the cream bottle. It is transparent.

& nbsp;

2. Abs: it belongs to engineering plastics, which is not environmentally friendly and has high hardness. It cannot be directly contacted with cosmetics and food. In acrylic cosmetics, it is generally the material of inner cover and shoulder cover. The color is yellowish or milky white.

3. PP, PE: environmental protection materials, which can directly contact with cosmetics and food, are the main materials for filling organic skin care products. The materials are naturally white and translucent. According to different molecular structure, it can achieve three different degrees of hardness and softness.

& nbsp;

4. Pet: it belongs to environmental protection material, which can directly contact with cosmetics and food. It is the main material for filling organic skin care products. Pet is soft and transparent in nature.

5. PCTA, PETG: environmental protection materials, which can directly contact with cosmetics and food, are the main materials for filling organic skin care products, which are soft and transparent. PCTA and PETG are soft and easy to scratch. And it is not commonly used for printing.

& nbsp;

6. Acrylic: the material is hard, transparent, and the background color is white. And acrylic in order to maintain a transparent texture often spray outside the bottle, or in the injection of color.

& nbsp;

2、 Type of packaging bottle

1. Vacuum bottle: cover, shoulder sleeve, vacuum pump, piston. Use with air pressure. The spray head matched has a chicken beak tip (some are all plastic ones or are covered with a layer of electrochemical aluminum), and the duck beak flat head is covered with a layer of plastic.

& nbsp;

2, emulsion bottle: cover, shoulder sleeve, emulsion pump, piston. Most of them are equipped with hoses inside. Most of them are made of outer acrylic and inner PP. The cover is made of outer acrylic and inner ABS. If the dairy industry is poor

& nbsp;

3, parfyumeriya shishasi: 1, ichki tarkibi alyuminiy tashqi shisha (qopqoq qismini burish va aylanmaslik bo'yicha ikki xil) 2, PP shishasi (kichik in'ektsiya PP) 3, shisha tomchilatib sug'orish 4, atir shishasi ichidagi asosan shishadan iborat. va PP. Katta hajmli stakandan foydalanish kerak, chunki saqlash muddati uzoq, PP kichik hajmdagi qisqa muddatli - saqlash uchun javob beradi. PCTA va PETG don & # 39; parfyumga ega emaslar.

& nbsp;

4. Cream bottle: it has an outer cover, an inner cover, an outer bottle and an inner tank.

A. Tashqi akril, ichki PP materiallari. Muqova tashqi akril va ichki ABS qatlamidan iborat bo'lib, PP qistirmalari bilan qoplangan.

B. Ichki keramika, PP tashqi anodlangan alyuminiy, tashqi anodlangan alyuminiy, PP ichki ABS PP qistirmalari qatlami bilan qoplangan.

C. Butun PP shisha ichida PP qistirmalari qatlami mavjud.

D. Tashqi ABS ichki PP. PP qistirmalari qatlami mavjud.

& nbsp;

5. Blow qoliplashbottle: mostly made of pet. There are three kinds of lids: Qianqiu lids, flip lids and rotary lids. Blow molding is the direct blow molding of the bottle embryo. It is characterized by a bump at the bottom of the bottle. It & #39;s brighter in the light.

& nbsp;

6. Blow injection bottle: mostly PP or PE. There are three kinds of lids: Qianqiu lids, flip lids and rotary lids. Blow injection bottle is a process of combining blow injection and blow molding, only one mold is needed. It is characterized by a binding line at the bottom of the bottle.

& nbsp;

7. Aluminum plastic hose: the inner part is made of PE and the outer part is packed with aluminum. And offset printing. After cutting, it can be spliced. According to the pipe head, it is divided into round pipe, flat pipe and elliptical pipe. Price: round tube & lt; oval tube & lt; flat tube

& nbsp;

8. All plastic hose: all PE material, and first pull out the hose before cutting offset, screen printing, hot stamping. According to the pipe head, it is divided into round pipe, flat pipe and elliptical pipe. Price: round tube & lt; oval tube & lt; flat tube.

Uchta. Sprinkler boshi, emulsiya pompasi, qo'l yuvish pompasi va uzunlikni o'lchash.

1. Nozzle: Bayonet (half bayonet aluminum, full bayonet aluminum), screw mouth are all plastic, but some are covered with a layer of aluminum cover, a layer of anodized aluminum.

2, emulsion pump: vacuum and straw, are all screw. A layer of anodized aluminum cover can also be set on the large cover and head cap of the screw mouth. It can be divided into two kinds: pointed bill and duck bill.

& nbsp;

3. Hand washing pump: the diameter is too large, and it & #39;s all screwed. A layer of anodized aluminum cover can also be set on the large cover and head cap of the screw mouth. Generally, steps are threaded, and those without steps are left and right knobs.

& nbsp;

Uzunlikni o'lchash: pipetaning uzunligi (qistirgichdan shlangning uchigacha yoki fbog uzunligiga qadar). Fosh qilingan uzunlik. Va uzunligi (shisha yelkasidan shishaning pastki qismigacha bo'lgan uzunlikka teng) katta qopqoq ostida o'lchanadi.

& nbsp;

Texnik xususiyatlari tasnifi: asosan mahsulotning ichki diametriga (ichki diametri nasosning ichki uchining diametriga) yoki katta doira balandligining tasnifiga bog'liq.

Nozzle: 15 / 18 / 20 mm all plastic 18 / 20 / 24

Emulsion pump: 18/20/24 MM

Hand washing pump: 24 / 28 / 32 (33) mm

Circle height: 400 / 410 / 415 (only specification code is not actual height)

Note: specifications and classifications are as follows: emulsion pump: 24/415

O'lchashning ikkita usuli mavjud: peeling usuli va mutlaq qiymat usuli. Xato 0. 02g ichida. Nasos tanasining o'lchami o'lchovlarni farqlash uchun ham ishlatiladi.

4、 Coloring process

1. Anodized aluminum: the outer surface of aluminum is wrapped on the inner plastic.

2. Electroplating (UV): compared with spray painting, the effect is bright.

3. Spray: compared with electroplating, the color is dull.

Frosting: muzli to'qimalarning qatlami.

Püskürtme ichkaridan: bu tashqi tomondan püskürtme va tashqi shisha o'rtasida aniq bo'shliq borligini anglatadi. Yon ko'rinishi maydoni kichik.

Tashqi shisha ichiga püskürtün: tashqi shishaning ichki tomoniga buzadigan amallar bo'yoqni tashqi tomondan katta maydon bilan. Vertikal tekislikning maydoni kichik. Va ichki shisha bilan bo'shliq yo'q.

4. Wire drawing, gold wrapping and silver wrapping: it & #39;s actually a film. Carefully observe the gap between the bottles.

5. Secondary oxidation: secondary oxidation is carried out in the original oxide layer, thus


So'rov yuborish
Biz bilan bog'lanishAgar biron bir savol bo'lsa

Siz quyidagi telefon, elektron pochta yoki onlayn shakl orqali biz bilan bog'lanishingiz mumkin. Mutaxassisimiz qisqa vaqt ichida siz bilan bog'lanadi.

Hozir bilan bog'laning!